A benzoate coprecipitation route for synthesizing nanocrystalline GDC powder with lowered sintering temperature

Electrolyte powders with low sintering temperature and high-ionic conductivity can considerably facilitate the fabrication and performance of solid oxide fuel cells (SOFCs). Gadolinia-doped ceria (GDC) is a promising electrolyte for developing intermediate- and low-temperature (IT and LT) SOFCs. However, the conventional sintering temperature for GDC is usually above 1200 °C unless additives are used. In this work, a nanocrystalline powder of GDC, (10 mol% Gd dopant, Gd_0.1Ce_0.9O_1.95) with low-sintering temperature has been synthesized using ammonium benzoate as a novel, environmentally friendly and cost-effective precursor/precipitant. The synthesized benzoate powders (termed washed- and non-washed samples) were calcined at a relatively low temperature of 500 °C for 6 h. Physicochemical characteristics were determined using thermal analysis (TG/DTA), Raman spectroscopy, FT-IR, SEM/EDX, XRD, nitrogen absorptiometry, and dilatometry. Dilatometry showed that the newly synthesized GDC samples (washed and non-washed routes) start to shrink at temperatures of 500 and 600 °C (respectively), reaching their maximum sintering rate at 650 and 750 °C. Sintering of pelletized electrolyte substrates at the sintering onset temperature for commercial GDC powder (950 °C) for 6 h, showed densification of washed- and non-washed samples, obtaining 97.48 and 98.43% respectively, relative to theoretical density. The electrochemical impedance spectroscopy (EIS) analysis for the electrolyte pellets sintered at 950 °C showed a total electrical conductivity of 3.83 × 10^?2 and 5.90 × 10^?2 S cm^?1 (under air atmosphere at 750 °C) for washed- and non-washed samples, respectively. This is the first report of a GDC synthesis, where a considerable improvement in sinterability and electrical conductivity of the product GDC is observed at 950 °C without additives addition.     

Low-cost and high-performance 3D printed YBCO superconductors

High-performance YBCO 123 (YBa₂Cu₃O_7-x) bulk superconductor samples were produced using the 3D printing paste-extrusion technique. The YBCO powder obtained after sintering a pre-mixture of Y₂O₃, BaCO₃ and CuO powders at 950 °C was used in the formulation of pastes for extrusion in a 3D freeform printer. The 3D samples printed from pastes containing the pre-mixture powders were sintered, while those produced using the YBCO powder were not. X-ray diffraction (XRD), energy dispersive spectroscopy (EDS) and Raman analysis all confirmed the YBCO phase after sintering, both in the powder and in the samples made with the pre-mixture. Scanning electron microscopy (SEM) images revealed powder grains of heterogeneous size and geometry, as well as grain aggregation, in the sintered samples. Superconducting quantum interference device (SQUID) measurements taken within a fixed magnetic range revealed that the printed pieces have a typical magnetization temperature of 92 K, reaching ?1.43 emu/g and ?1.59 emu/g respectively a zero-field-cooled magnetization (ZFC) for sintered and non-sintered printed samples.     

Crack-free caustic magnesia-bonded refractory castables

A growing interest in designing high-alumina MgO-bonded refractory castables has been identified in recent years due to the magnesia ability to react: (i) with water at the initial processing stages of these materials (inducing the precipitation of brucite phase) or (ii) with alumina, giving rise to in situ MgAl₂O₄ generation at high temperatures. Nevertheless, despite the great potential of caustic magnesia to be used as a binder in such systems due to its high reactivity, it is still a challenge to control the hydration reaction rate of this oxide and the negative effects derived from the expansive feature of Mg(OH)₂ formation. Thus, this work evaluated the incorporation of different contents of aluminum hydroxyl lactate (AHL) into caustic magnesia-bonded castables, aiming to control the brucite precipitation during the curing and drying steps of the prepared samples, resulting in crack-free refractories. The designed compositions were characterized via flowability, setting behavior, X-ray diffraction, cold flexural strength, porosity, permeability and thermogravimetric measurements. According to the results, instead of Mg(OH)₂, hydrotalcite-like phases [Mg₆Al₂(OH)₁₆(OH)₂.4.5H₂O and Mg₆Al₂(OH)₁₆(CO₃)·4H₂O] were the main hydrated phases identified in the AHL-containing compositions. The addition of 1.0 wt% of aluminum hydroxyl lactate to the designed castable proved to be, so far, the best option for this magnesia source, resulting in the development of a crack-free refractory with enhanced properties and greater spalling resistance under heating.     

Cell-Free Synthesis of Selenoproteins in High Yield and Purity for Selective Protein Tagging

The selenol group of selenocysteine is much more nucleophilic than the thiol group of cysteine. Selenocysteine residues in proteins thus offer reactive points for rapid post-translational modification. Herein, we show that selenoproteins can be expressed in high yield and purity by cell-free protein synthesis by global substitution of cysteine by selenocysteine. Complete alkylation of solvent-exposed selenocysteine residues was achieved in 10 minutes with 4-chloromethylene dipicolinic acid (4Cl-MDPA) under conditions that left cysteine residues unchanged even after overnight incubation. Gd^III−Gd^III distances measured by double electron–electron resonance (DEER) experiments of maltose binding protein (MBP) containing two selenocysteine residues tagged with 4Cl-MDPA-Gd^III were indistinguishable from Gd^III−Gd^III distances measured of MBP containing cysteine reacted with 4Br-MDPA tags.     

Optimized mobility management protocol for the IoT based WBAN with an enhanced security

Wireless Networks - Today, Wireless Sensor Network (WSN) is widely used for general purposes. With the propagation of the Internet of Things (IoT), security issues arise wherever the healthcare...     

Microstructure of mayenite 12CaO·7Al2O3 and electron emission characteristics

Electron emission characteristic, electrical conductivity of polycrystalline mayenite (12CaO·7Al₂O₃) electride, formation of [Ca₂₄Al₂₈O₆₄]⁴⁺(e⁻)₄ framework as a function of phase content, and microstructure have been investigated. The mayenite microstructure was investigated using high-resolution transmission microscopy which revealed the type cage structure of 12CaO·7Al₂O₃ partially filled by extra-framework oxygen ions. Incorporation of electrons by means of carbon ion template 12CaO·7Al₂O₃ produces complex structure, and an incomplete ion template 12CaO·7Al₂O₃ structure consisting of mixture of a [Ca₂₄Al₂₈O₆₄]⁴⁺(e⁻)₄ and [Ca₂₄Al₂₈O₆₄]⁴⁺(O²⁻)₂ framework had a direct effect on the electron emission. Surface chemistry and stability of the 12CaO·7Al₂O₃ electride have been studied using x-ray photoelectron spectroscopy. The work function of phase pure 12CaO·7Al₂O₃ electride was determined from direct thermionic emission data and compared to the measurement from ultraviolet photoelectron spectroscopy (UPS). Depending on the extent of ion template of 12CaO·7Al₂O₃ structure, a work function of 0.9–1.2 eV and 2.1–2.4 eV has been measured and thermionic emission initiating at 600°C.     

Rheokinematics for product development—Formulation screening in rotational rheometers

Product formulations for industrial processes are typically developed at laboratory scale. However, the mixing conditions are not easily mimicked in the laboratory. A rotational device is proposed in this study as a fast laboratory-scale formulation development, which enables mimicking the mixing conditions in the industrial process. The geometrical configurations of the rotational device are from rheometry devices (plate-plate and cone-plate). The main advantages of this method are the small amounts of raw materials and shorter testing times. This methodology is applied to an industrial case study, the reaction injection molding (RIM) process. The mixing length scales evolution in the rotational rheometer were matched to those in RIM machines. The main novelty of this study is the introduction of a protocol that bridges the processing conditions at laboratory using small amounts of raw materials to high throughput continuous flow reactors.     

A Symmetrical Diester as the Sex Attractant Pheromone of the North American Click Beetle Parallelostethus attenuatus (Say) (Coleoptera: Elateridae)

Hexanoic acid, 1-octanol, 1,8-octanediol, octyl hexanoate, 1,8-octanediol monohexanoate, and 1,8-octanediol dihexanoate were identified in headspace volatiles collected from the crushed abdomen of a female click beetle of the species Parallelostethus attenuatus (Say) (Elaterinae, tribe Elaterini). In field trials carried out in Illinois, South Carolina, North Carolina, and Virginia, adult male beetles were strongly attracted to 1,8-octanediol dihexanoate alone. Blends of the dihexanoate with one or more of the other compounds proved to be less attractive than the dihexanoate alone, suggesting that the pheromone of this species may consist of a single compound. The symmetrical diester structure of the pheromone is a novel natural product and appears to be structurally unique among insect pheromones.

     

Estimated genetic parameters for all genetically evaluated traits in Canadian Holsteins

Genetic improvement is a crucial tool to deal with the increasing demand for high quality, sustainably produced dairy. Breeding programs are based on genetic parameters, such as heritability and genetic correlations, for economically important traits in a population. In this study, we estimated population genetic parameters and genetic trends for 67 traits evaluated on heifers and first-lactation Canadian Holstein cows. The data consisted of approximately 500,000 records with pedigree information collected from 1980 to 2019. Genetic parameters were estimated using bivariate linear animal models under a Bayesian approach. Analyses for the 67 traits resulted in 2,211 bivariate combinations, from which the estimated genetic parameters are reported here. The most highly heritable traits were fat percent (0.66) and protein percent (0.69), followed by stature (0.47). Lowest heritabilities (0.01) were observed for disease-related traits, such as lameness and toe ulcer, and calf survival. The genetic correlations between gestation length, calf size, and calving ease measured on both heifer and cows were close to unity. On the other hand, traits such as body condition score and pin width, cystic ovaries and sole ulcer, rear teat placement, and toe ulcer were genetically unrelated. This study reports genetic parameters that have not been previously published for Canadian Holstein cows, and provides updates of those previously estimated. These estimates are useful for building new indexes, updating existing selection indexes, and for predicting correlated responses due to inclusion of novel traits in the breeding programs.     

Extracting Stray Magnetic Fields from Thin Ferromagnetic Layers in Hybrid Superconducting/Ferromagnetic Heterostructures

Journal of Superconductivity and Novel Magnetism - Hybrid Nb(20)/Cu(5)/Py(2), Nb(20)/Cu(5)/Co(40) and Nb(20)/Cu(d $$_{Cu}$$ )/Py(2)/Cu(5)/Co(40) heterostructures (values in nanometers and d...